Features; Installation - LENCO IPD-5300 Handbuch

cord should be unplugged from the unit to prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described in the user's
operating instructions. Service methods not covered in the operating instructions should be referred
to qualified service personnel.
Thank you for purchasing the PORTABLE RADIO iPod / iPhone DOCKING.
This model incorporates following features :
Different iPod / iPhone models Player / Re-charger
FM receiver with digital read out on LCD
Clock and Alarm timer function
Wake up to Alarm (Buzzer), Radio or iPod with Snooze function
Sleep timer function
LCD display with back-light
Audio line-in (AUX) for connecting other digital audio player
Built-in 2 High Fidelity Speakers
Bass and Treble settings
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to
connect specifically to iPod or iPhone respectively and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this accessory with iPhone or iPod
may affect wireless performance.
iPhone, iPod, iPod mini, iPod nano, iPod touch, iPod classic and iPod shuffle are trademarks of Apple Inc., registered
in the U.S. and other countries.
iPhone, iPod are not included.
Clock setting battery back-up
A backup battery compartment located at bottom of the unit.
(1) Open the main battery compartment A lid then open the inner clock battery compartment lid
as well.
(2) For clock setting backup, follow the polarity diagram shown inside the compartment and install
2 x AAA (UM-4) batteries (purchase separately).
(3) Close the clock battery compartment lid.
Install main battery
(4) For radio, iPod/iPhone and AUX operation, follow the polarity diagram shown inside
the compartment A and B and install 8 x C (UM-2) batteries (purchase separately).
(5) Close the main battery compartment lids.
AC-DC Adaptor Connection
The unit can be powered by an external AC-DC Adaptor, required the output
DC 12V 2000mA (included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.

Features

Installation

4