Cleaning - Far Rp-115 Ci Bedienungsanleitung

ENGLISH
BLENDER
Initial use - General information
Remove the rear protective housing (3b).
1.
Put the ingredients to be mixed into the
2.
blender (11).
Push the blender lid (10) onto the blender until
3.
it is correctly fitted in place.
Insert the locking cap (9) into the hole in
4.
the lid (10) and turn it clockwise to lock it.
Insert the blender (11) into the attachment hole
5.
and turn it clockwise until it is correctly fitted
in place.
Using the blender
Check that the control dial (5) is at the off
1.
position (OFF/0).
Plug the device into a secure 230V/50Hz mains
2.
supply.
Switch on the appliance and select the
3.
appropriate speed using the control dial (5).
• Speed 5: For light mixtures with liquids.
• Speed 6: For more substantial mixtures –
For mixing liquid and solid ingredients.
• Pulse function: For short, powerful bursts
(the control dial does not remain in the "Pulse"
position. You must keep it in this position or
turn it to this position several times.)
Useful tips:
• Risk of burns! Take care with hot liquids.
• Opening the locking cap (9) lets you add ingredients when the blender is in use.
To do this, remove the blender lid locking cap (9).
• You may have to switch off the device several times in order to unstick bits of
ingredients stuck to the inside wall of the blender.
– Switch off the appliance and unplug it.
– Remove the locking cap (9) and lid (10).
– U nstick the pieces of ingredients stuck to the inside wall of the blender (11)
with a soft spatula.
Keep the spatula a safe distance from the blade.
GB-12

CLEANING

• Before cleaning the appliance, unplug it from the mains supply.
• Never immerse the motor housing in water!
• Do not use any abrasive detergents or sharp utensils.
Motor housing
• Only use a damp cloth to clean the outside of the housing.
Mixer bowl, utensils, parts for the vegetable cutter, mincer and blender
WARNING:
• These parts are not dishwasher-safe. If they are exposed to heat or caustic
cleaners, they may become deformed or discoloured.
• Parts that have come into contact with foodstuffs must be cleaned with soapy
water.
WARNING:
• The mincer blade is very sharp!
• Risk of injury!
• Leave the parts to dry fully before refitting them to the appliance.
• Apply a little vegetable oil to the cutter plates once they are dry.
Vegetable cutter, Blender, Dough machine
• Parts that have come into contact with foodstuffs must be cleaned with soapy
water.
• Leave the parts to dry fully before refitting them to the appliance.
• Apply a little vegetable oil to the cutter plates once they are dry.
• If you are having difficulty removing the dough from the discs, wait until it is
completely dry, then lightly tap on it to unstick it.
WARNING:
• The cutting parts of the cutter cones are very sharp!
• Risk of injury!
ENGLISH
GB-13