Herunterladen Diese Seite drucken

Using The Mixer Bowl; Blender - Far Rp-115 Ci Bedienungsanleitung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 45
ENGLISH
Press the button to raise/lower the head
Use the dial to select the speed and pulse function
GB-8
Optional accessories -Mixer
9 Locking cap
10 Lid

11 Blender

Optional accessories - Splash guard
for the mixer bowl
12 S plash guard for the mixer bowl

USING THE MIXER BOWL

Set the mixer bowl onto its base, then turn it in the "LOCK" direction until it is
1.
locked in position.
Press the button (4) to raise the appliance arm. The arm moves upwards.
2.
Fit the required utensil by inserting its upper part into the drive shaft and locking
3.
the cotter pin into the shaft by turning it to the right.
Then, place the ingredients in the bowl.
4.
Do not overload the bowl. Its maximum capacity is 1.5 kg of ingredients.
Lower the arm using the button (4).
5.
Plug the appliance into a secure and correctly installed 230V/50Hz mains supply.
6.
Switch on the device by moving the control dial to one of the speeds, between 1 and
7.
6 (depending on the mixture).
To use the pulse function (short bursts), turn the control dial to the "PULSE"
8.
position. The control dial must be kept in this position while the desired function
is in use. When you release the control dial, it returns automatically to the "0"
position.
Adjust the speed and use the dough hook for mixtures up to a maximum of 2 kg
Speeds
Use
Heavy mixture
1-2
Dough hook
(e.g.: bread dough, short pastry)
Medium to heavy mixture
3-4
Beater
(e.g.: pancake batter, sponge cake mixture)
Light mixture
5-6
Whisk
(e.g.: cream, egg whites, etc.)
Pulse function
Pulse
Whisk
(e.g.: folding in the egg whites, flour)
NOTE:
• Short operating time: For heavy mixtures, do not use the machine for more than
ten minutes, and then allow it to cool down for a further ten minutes.
• Use the splash guard to protect against liquid mixtures.
After kneading/beating, turn the control dial (5) to "0" when the mixture forms a
9.
ball. Then, unplug the appliance.
Press the button (4) to raise the arm.
10.
You can now unstick the mixture using a spatula and remove it from the mixer bowl.
11.
Turn the mixer bowl to the left to be able to remove it.
12.
Clean the parts as described in the "Cleaning" section.
13.
ENGLISH
Type of mixture
GB-9
loading