Check Weighing; Auto Power Off; Backlight - Gram CM series Bedienerhandbuch

UF-2 Check weighing
1. Press the
2. The display will show the message "0000.0L"
3. Use ◄, ►, ▲, 0 ~ 9 keys to set LO weight value.
4. Press the
5. The display will show the message "0000.0H"
6. Use the ◄, ►, ▲, 0 ~ 9 keys to set HI weight value.
7. Press the
8. The display will show the message "O 000"
9. Use the ◄, ►, ▲, 0 ~ 9 keys to set I/O SET value.
10. Press the
11. To continue with other setups use the ► key.
12. To exit menu and return back to weighing mode, press the
UF-3 Auto Power-off
Modes:
- AoFF 00 – Auto Power-off disable
- AoFF 01 – The scale turns off automatically in 1 minute when the scale is not in
operation and weight at 0.
Auto power-off timer up to 99 minutes (AoFF01~AoFF99), the factory default is
AoFF10 (10 minutes)
1. Press the
2. Use ◄, ►, ▲, 0 ~ 9 keys to enter Auto Power-off time.
3. Press the
4. To continue with other setups use the ► key.
5. To exit menu and return back to weighing mode, press the
UF-4 Backlight
Modes:
- Lit Off: Backlight off
- Lit A: Auto light up
- Lit on: Backlight on
Factory default is: Lit A (automatical)
1. Press the
2. Use the ▲ key to select the desired mode.
3. Press the
4. To continue with other setups use the ► key.
key to start check weighing setup.
key to confirm.
key to confirm.
key to confirm.
key to setup Auto Power-off.
key to confirm.
key to access the backlight setup.
key to confirm.
key.
key.
11