Kyocera DF-710 Bedienungshandbuch Seite 35

Clearing a Staple Jam
If a message indicating a staple jam is displayed on the machine
the jammed staples.
Staple cartridge holder A
Follow the steps below to remove jammed staples.
NOTE:
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8).
3
Re-install the staple cartridge holder A.
4
Open the cover plate (A) of the staple cartridge
holder A and remove any jammed staples.
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
See page 35 to clear staple jams in the optional folding unit.
English
'
s operation panel, remove
33