Kyocera DF-710 Bedienungshandbuch Seite 29

Center-Folding Unit (option)
Conveyor Section
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the
conveyor section of the Center-Folding Unit.
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8) and remove the jammed
paper.
If there is no paper jam in the right cover (D8),
proceed to the following step.
3
Close the right cover (D8) and re-install the finisher back into position on the machine.
4
Open the front cover.
5
Pull out the internal tray (D5).
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
English
27