Kyocera DF-710 Bedienungshandbuch Seite 33

Curled Output
If the copies ejected are curled, adjust using the
pressure roller bottom adjuster knob (E1) and
pressure roller top adjuster knob (E2).
NOTE:
paper jams in the conveyor and internal
trays. If this occurs, follow the steps below to
adjust for paper curling.
Paper curled downward
1
Open the front cover.
2
Set pressure roller top adjust knob (E2) to
operation method, see Paper curled upward on
page 32.
3
Pull pressure roller bottom adjust knob (E1) outward and turn in the direction of a higher
number.
Align the knob with a number to lock the knob by setting the knob protrusions into the frame
cutout area.
4
Close the front cover.
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Curled paper can cause frequent
' '
1 . For
3
1
E1
1
2
3
4
5
English
E2
E1
5
4
E2
2
1
2
31