Care And Cleaning; Cleaning The Filters - Electrolux GA60SLICSP Benutzerinformation

10.5 Before starting a
programme
Before you start the selected
programme, make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the type
of load and the degree of soil.

11. CARE AND CLEANING

WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Make sure that the Comfort
Lift basket is empty and
locked in the raised position.
Dirty filters and clogged
spray arms negatively affect
the washing results. Check
these elements regularly
and, if necessary, clean
them.

11.1 Cleaning the filters

The filter system is made of 3 parts.
• The correct quantity of detergent is
used.
10.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance. Hot
items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is
completed, water can still
remain on the inside
surfaces of the appliance.
C
B
A
1. Turn the filter (B) counterclockwise
and remove it.
2. Remove the filter (C) out of filter (B).
ENGLISH 19