Controls And Instruments; Using Controls And Instruments; Forward - Reverse; Parking Brake - Gianni Ferrari GTS 200 Technisches Handbuch

5. CoNtroLs ANd iNstrUMENts

The machine includes the following controls:
1) Steering wheel

2) Parking brake

3) Adjusting the longitudinal seat
4) By-pass lever
5) Elevator activating lever basket
6) Lever for quik grip
7) P.T.O. and turbine engagement
8) Acelerator

6. UsiNG CoNtroLs ANd iNstrUMENts

6.1 ForwArd - rEVErsE

6.2 PArKiNG BrAKE

6.3 diFFErENtiAL LoCKiNG dEViCE

6.4 By-PAss

IMPORTANT:
Avoid towing the machine for long stretches with inserted by-pass.

6.5 HANd tHroLLE

6.6 P.t.o
See figure 6.6

6.7 HydrAULiC LiFt oF tHE EQUiPMENt

6.8 ELEVAtor / BAsKEt oVErtUrNiNG

E. Lifting basket
F. Closing elevator
IMPORTANT:
When trasferring the machine, especially when makin curves, do not procede in any case with
basket outside.

6.9 QUiCK CoUPLiNGs

7. wiriNG diAGrAM

7.0 CoLoUr PALEttE

G
A Sky-blue
H
B white
L
C
Orange
18
See figure 6.1
See figure 6.2
See figure 6.3
See figure 6.4
See figure 6.5
See figure 6.9
Yellow M Brown
Grey N Black
Blue R Red
See figure 5.
9) Lever for lifting the equipment
10) Light switch
11) Switch key
12) Differential locking device pedal
13) Forward speed pedal - reverse gear
14) Engine choke control
15) Clogged oil filter light
16) Hourmeter
See figure 6.7
See figure 6.8
S
Pink
V
Green
Z
Violet
THIS SIMBOL INDICATE
THE EARTH