Connecting The Projector - Sony VPL-DX10 Kurzreferenz

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
• Refer also to the instruction manual of the equipment to be connected.
• For VPL-DX15, when connecting to a
connector, see "Operating Instructions for Network/USB File Viewer" stored on the
CD-ROM.
To connect a computer
a Plug the AC power cord into a wall outlet.
b Connect the projector to a computer.
Rear
to INPUT A
connector
Computer
to monitor output
to AUDIO
connector
2
2
2 1
to audio
output
(Network) connector or
to AC IN socket
AC power cord
(supplied)
1 Stereo audio connecting cable (not
supplied) (Use a no-resistance
cable.)
2 HD D-sub 15-pin cable (supplied)
(USB)
1
1
to a wall outlet
5
GB
Projecting