Sony VPL-DX10 Kurzreferenz Seite 22

To connect a VCR/DVD player
a Plug the AC power cord into a wall outlet.
b Connect the projector to a video equipment.
For video signal connections, the following three connecting options are
available:
To connect to the video output connector of a VCR/DVD: Connect with cables 1
and 4.
To connect to the S-Video output connector of a VCR/DVD: Connect with cables
2 and 4.
To connect to the video GBR/Component connector of a VCR/DVD: Connect with
cables 3 and 4.
Rear
to INPUT A
connector VIDEO
connector
3
to video
GBR/
component
output
to S video
VCR
6
GB
Projecting
to AUDIO
to VIDEO
to S
connector
connector
2 1 4
to video
output
output
to AC IN socket
2
2
AC power cord
(supplied)
to audio (Left/Right)
output
1 Video cable (not supplied)
2 S-Video cable (not supplied)
3 Signal Cable (not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono
plug
4 Stereo audio connecting cable (not
supplied) (Use a no-resistance
cable.)
1
1
to a wall outlet