Features - Sony RM-450a Bedienungsanleitung

Features

VTRs connectable to the unit
A 9-pin remote control connector is provided.
It is possible to connect the following VTRs.
U-matic VTR VO-9850/9850P,
BVU-800/900 series
Hi 8 VTR EVO-9850/9850P
S-VHS VTR SVO-5800/5800P
Betacam SP VTR UVW series, BVW series,
PVW series
DVCAM VTR DSR series
CTL/time code/RTC (relative time code)
selection
You can select a CTL signal, time code or RTC
(relative time code) for editing. When RTC is
selected, the time code is used as an edit reference and
its progress is counted as CTL on the time counter.
RTC can be used to determine how far the desired tape
point is from the IN point as it can be reset in the same
manner as a CTL.
Pinch on delay time learning capability
The unit can detect the pinch on delay time of the
connected VTR and hold this data for a week even
after the power is turned off. Therefore, the operation
with the connected VTRs is very smooth and no
discontinuity of the picture is produced by this unit.
Various edit functions
In the assemble mode, the video signal and audio
signals (A1 and A2) are edited together at the same
time.
In the insert edit mode, they can be edited separately.
The unit can also perform the split edit. Therefore,
you can set the audio IN point independently from that
of the video channel and vice versa.
Materials you are to edit can be previewed and those
that you have edited already can be reviewed.
Easy data pre-setting
You can easily preset various data, such as the preroll
time and the edit timing, needed for editing on the
front panel.
4
Quick tape access to the scene to edit
Variable speed of playback functions in the shuttle
mode and jog mode enable you to locate the edit point
more quickly.
Synchronization with the connected VTR
The REF.VIDEO IN connector allows the unit to
synchronize with the connected VTR. Therefore, the
unit can perform absolutely precise editing.
Control of the VTR with the dynamic
tracking™ function
When the VTR which has the dynamic tracking
function is connected to this unit as the player VTR,
this unit can edit the picture in the variable speed.
Error indications
The unit indicates the error by displaying the error
number on the time counter and outputting a warning
sound. You can understand right away what kind of
error has occurred and what you should do.
Rack mountable
The unit can be mounted on the RMM-450 rack mount
metal which is designed for a standard 19-inch rack,
and on the SU-500 series system console by using the
SU-450 double size table.