Modifying The Edit Points Already Entered; Checking The In/Out Point - Sony RM-450a Bedienungsanleitung

Modifying the Edit Points Already Entered

Locating the edit points

Checking the IN/OUT point

Search for the desired edit point and press the PLAYER/RECORDER IN
or OUT button simultaneously with ENTRY button again.
Changing the edit points frame by frame
You can change the edit points with the TRIM buttons to set them
precisely.
RESET
HOURS MINUTES SECONDS FRAMES
PLAYER
POWER
ON
STDBY EJECT
OFF
PLAY STILL REW FF
REVERSE FORWARD
SHUTTLE JOG
1
Press and hold the IN or OUT button.
The frame number of the IN or OUT point is displayed on the time
counter.
2
Press and release the TRIM + button to increase the edit point by one
frame, or press and release the TRIM – button to decrease.
The number on the time counter changes.
Resetting the edit points
Press the RESET button to reset both of the edit points.
Press the RESET button simultaneously with the IN button to reset only
the IN point, and simultaneously with the OUT button to reset only the
OUT point.
Recalling the previous edit points
Press the LAST EDIT button.
Press the GO TO button simultaneously with the IN/OUT button.
You can check the time data of the edit points on the time counter while
pressing the IN or OUT button.
You can check the duration between the IN and OUT points by pressing
the IN and OUT buttons simultaneously.
2
SERVO IN OUT IN OUT SERVO
EDITING CONTROL UNIT RM-450A HOURS MINUTES SECONDS FRAMES
ASMBL V A1 A2 REC
EDIT MODE
– +
PLAY
AUDIO SPLIT TRIM LAST EDIT
REVERSE
IN OUT GO TO IN OUT
PLAYER RECORDER
ENTRY
AUTO EDIT RVW
PREVIEW ALL STOP
/END /JUMP
1
RESET TOTAL
RECORDER
EDIT STDBY EJECT
STILL REW FF
FORWARD
SHUTTLE JOG
19