Butt Edit - Sony RM-450a Bedienungsanleitung

Butt Edit

You can continuously perform the assemble edit by entering the edit points
on the player only. When one editing from the IN point to the OUT point
is completed, the tape of the recorder returns to the OUT point, and stops
there.
This OUT point can be used as the next IN point for the recorder.
Therefore to continue editing, all you have to do is to enter the edit points
for the player by pressing the AUTO EDIT/END button.
RESET
POWER
ON
OFF
PLAY STILL
REVERSE
1
SHUTTLE
2,3
1
Searching for IN point for the player
2
Editing
Press the AUTO EDIT/END button to set the IN point.
The editing begins.
3
Stopping editing
Press the AUTO EDIT/END button again to stop editing. This point is
entered as the OUT point, and editing is completed.
The tape on the player
The tape on
the recorder
The first IN point
SERVO IN OUT IN
HOURS MINUTES SECONDS FRAMES EDITING CONTROL UNIT RM-450A HOURS
PLAYER
STDBY EJECT ASMBL V A1 A2
EDIT MODE
– +
REW FF
AUDIO SPLIT TRIM LAST EDIT
FORWARD
IN OUT GO TO IN OUT
PLAYER RECORDER
ENTRY
JOG
AUTO EDIT RVW
PREVIEW ALL STOP
/END /JUMP
IN point
First scene Second scene
The first OUT point which automatically
becomes the second IN point
OUT SERVO
RESET TOTAL
MINUTES SECONDS FRAMES
RECORDER
REC EDIT STDBY EJECT
PLAY STILL REW FF
REVERSE FORWARD
SHUTTLE JOG
OUT point
25