SMART Room System Konfigurationshandbuch Seite 21

SOFTWARE CONFIGURATION GUIDE
SMART ROOM SYSTEM FOR MICROSOFT LYNC
Configuring Lync Room System software
NOTE
The following procedure documents SMART's recommended configuration of Lync Room
System software for a typical Lync infrastructure setup. Refer to the Microsoft Lync Room System
Deployment Guide (microsoft.com/download/confirmation.aspx?id=39274) for detailed
deployment information.
To configure Lync Room System software
1. Click Lync Settings, and then set the following controls:
Control
Credentials
User Name
SIP URI
Password
Proxy Credentials
Configuration Modes If your organization maintains a mixed environment of Lync 2010 and
Quality Control
Logging
TIP
You can record this information on page 3 for future reference.
19 smarttech.com/kb/170608
Procedure
Type the Lync account's full domain name in one of two formats
depending on how your organization's servers are configured
(for example, yourdomain\room1 or room1@yourdomain.com).
Type the Lync account's SIP URI
(for example, room1@yourdomain.com).
NOTE
If the domain name used in the Lync account's SIP URI is different
from the domain name on the Lync Web Service certificate, see
the SMART Room System for Microsoft Lync setup and
maintenance guide (smarttech.com/kb/170450).
Type the Lync account's password.
Select Use Lync Account credentials.
Lync 2013 server pools, select Manual, and then type the address of
the Lync 2013 server pool in the Internal Server Name box.
Optionally, enable the Customer Experience Program to assist with
troubleshooting.
Optionally, select Full in the drop-down list, and then enable
Windows® Event Logging to assist with troubleshooting.