Sony SRW-5800 Bedienungsanleitung Seite 18

and the optional HKSR-5803SQ or
HKSR-5803HQ is installed)
B (OPTION)/INPUT MONITOR
BNC (2) (when the optional HKSR-
5803SQ or HKSR-5803HQ is
installed)
REF. INPUT1, REF. INPUT2 (OPTION)
BNC (2 + 2 loop-through)
HD Trilevel SYNC
0.6 Vp-p, 75 Ω, sync negative
SD Black burst
NTSC: 0.286 Vp-p, 75 Ω, sync negative
PAL: 0.3 Vp-p, 75 Ω, sync negative
Selecting HD or SD in a menu
DIGITAL I/O (AES/EBU) INPUT
BNC (6)
CH1/2 to CH11/12
AES/EBU format, unbalanced
Note
When connecting devices for AES/EBU signal input/
output, use a cable whose length is less than 300 meters.
TIME CODE IN
XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 kΩ, balanced
Output connectors
HD SDI OUTPUT
A BNC (3, MONITOR with superimposed
text)
HD SDI (1.485 Gbps) (conforms to
SMPTE 292M/BTA S004B)
3G-SDI (2.97 Gbps) (conforms to
SMPTE 424M) (when the serial
number of this unit is 11001 or higher
and the optional HKSR-5803SQ or
HKSR-5803HQ is installed)
B (OPTION)
BNC (3) (when the optional HKSR-
5803SQ or HKSR-5803HQ is
installed)
SD SDI OUT BNC (3, MONITOR with superimposed
text)
SD OUT
COMPOSITE (SUPER)
1.0 Vp-p, 75 Ω, sync negative
SYNC Black burst
0.286 Vp-p (NTSC)/0.3 Vp-p (PAL), 75
Ω, sync negative
FORMAT CONV. OUT (OPTION)
HD SDI (1.485 Gbps) (conforms to
SMPTE 424M/BTA S004B) (when
the optional HKSR-5001 is installed)
3G-SDI (2.97 Gbps) (conforms to
SMPTE 424M) (when the optional
18
Specifications
HKSR-5001 with a serial number of
15001 or higher is installed)
BNC (2, with superimposed text)
FC OUT B (OPTION)
(when the optional HKSR-5001 is
installed)
BNC (2, with superimposed text)
HD REF. OUT
BNC (2)
1125 SYNC
Tri-level SYNC
0.6 Vp-p, 75 Ω, sync negative
DIGITAL I/O OUTPUT (AES/EBU)
BNC (6)
CH1/2 to CH11/12
AES/EBU format, unbalanced
MONITOR OUTPUT L, R
XLR, 3-pin, male (2)
+4 dBm (with a 600 Ω load), low
impedance, balanced
TIME CODE OUT
XLR, 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES JM-60 stereo phone jack
– ∞ to –12 dBu (with an 8 Ω load),
unbalanced
Remote connectors
NETWORK 1 RJ-45 modular jack
REMOTE 1-IN(9P)
D-sub 9-pin, female
REMOTE 1-I/O(9P)
D-sub 9-pin, female
VIDEO CONTROL
D-sub 9-pin, female (for optional HKDV-
900)
REMOTE 2 PARALLEL I/O(50P)
D-sub 50-pin, female
Accessories supplied
Operation Guide (1)
Installation Manual (English version (1), Japanese version
(1))
Operation Manual (CD-ROM) (1)
Optional accessories
HKSR-5001 Format Converter Board
HKSR-5802 Digital Betacam/HDCAM Processor Board
HKSR-5803SQ RGB SQ Processor Board
HKSR-5803HQ Advanced HQ Processor Board
HKSR-5804 Network Interface Board
RMM-110 Rack Mount Adaptor
BCT-HD12CL Cleaning Cassette