Panasonic TY-FB30DHD3D Bedienungsanleitung Seite 25

2D (Dual Link HD-SDI) manual settings
By mounting this board on a compatible display, sampling format/number of bits per pixel can be changed
manually when 2D (Dual Link HD-SDI) is input.
If images are not displayed on screen under standard display settings (Auto), use the menu to set them manually.
(For details on the setting method, see the instruction manual for the display unit.)
Auto : Signal format is automatically set based on information added to the input signal.
YCbCr etc: Sampling format/number of bits per pixel are forcibly adjusted to the input signal settings.
with the requirements of Technical Regulation on the Restriction Of the use of certain
The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain
Hazardous Substances in electrical and electronic equipment (TR on RoHS).
The content of hazardous substance with the exemption of the applications listed in the Annex
1. Lead (Pb) – not over 0.1wt % or 1000wt ppm;
2. Cadmium (Cd) – not over 0.01wt % or 100wt ppm;
3. Mercury (Hg) – not over 0.1wt % or 1000wt ppm;
4. Hexavalent chromium (Cr
5. Polybrominated biphenyls (PBBs) – not over 0.1wt % or 1000wt ppm;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1wt % or 1000wt ppm
Declaration of Conformity
Hazardous Substances in Electrical and Electronic Equipment
(adopted by Order 1057 of Cabinet of Ministers of Ukraine)
6+
) – not over 0.1wt % or 1000wt ppm;
2 of TR on RoHS:
.
25