Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Handling Cautions
• Do not touch connector contacts with hands directly.
To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object
such as a steel cabinet to discharge yourself.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label (1 sheet)
(Affix this label to the applicable slot of the rear panel of the display.)
Replacement
To remove
Remove the slot cover. Grip
the handle of the terminal
board, and slowly pull out in
the direction of the arrow.
20
Foam mat or
thick soft cloth
To install
1. Remove the slot
cover.
Securing screw
Be sure to fasten all screws tightly.
Have the customer keep the removed Terminal Board for future servicing
needs.
Screw × 4
2. Insert the terminal board
until it is firmly plugged
into the connector.
Tighten screws in the
order
1
-
4
.
1
2
4
3
3. Affix the terminal
function label
(included).
Werbung
Inhaltsverzeichnis
