Getting Ready; Set Up - afx light PROFAZE-TOUR Bedienungsanleitung

Getting Ready

All products are thoroughly tested at the factory and shipped
in perfect condition. If damage has occurred during shipping,
or if components are missing, please contact your local dealer
immediately.
Your package should include:
1.One PROFESSIONAL FAZE MACHINE (PROFAZE-TOUR)
2.One Power Cord
3.One product user manual

Set Up

1. Open the shipping carton and carefully remove the unit from the
shipping carton;
2. Be sure to remove packing material from around the faze machine,
especially near the nozzle;
3. Set the faze machine on a dry, flat surface;
4. Connect the quick connector with the liquid tank cap (Figure 1-C).
Be sure of well connection. Use definitely water based liquid of
good quality;
5. Plug mains power cord from the faze machine into appropriate
power supply socket. Wait about 60 seconds for heating element to
heat up;
6. Use LCD display for operating control, or connect DMX controller
for setting;
7. Moving the machine during operation could probably get air
entered into the liquid pipe and affect smoothness of fog blasts. If
this happened, press the start/stop button to fog for a moment.
Until the air is dispersed from the pipe, the machine will recover its
normal fogging.
©Copyright LOTRONIC 2018 6