Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
1. Plug mains power cord from the faze machine into appropriate
power supply socket;
2.
Version: 1.0
Warming-Up
3.
>>>>>>>>>>>
4. Wait about 60 seconds for heating element to heat up;
DMX Address: 1
5.
__ IDLE __
6. After the heating up is complete, Please do follow the required operating
modes;
Continuous Fogging Operation
Panel control, DMX signal is not connected.
DMX Address: 1
1.
Vol=xxx Fan=xxx
2. Press MENU to enter Volume adjustment;
Volume: 5
3.
____ IDLE ____
4. Press MENU to switch to adjust the speed of fan, please note continuous
fogging still works at the same moment;
©Copyright LOTRONIC 2018
Primary power on;
2 seconds after, switches to working status:
heating up;
After heating up, displays the previous functions
list before the last power off: The picture shows
the new machine default state;
Press START/STOP to enter continuous fogging
status, please note continuous fogging starts at
the same moment;
The first line is the setting state, usually shows
the last setting in the last operation, such as
DMX, Address, or Volume, or Fan, Power, and
so on, the following will be replaced by XXXXX.
The second line shows the real-time working
state.
Press "Up" or "Down" to adjust faze volume
value (5 -100%);
10
Werbung
Inhaltsverzeichnis
