Maintenance And Storage - Ayce NTL 534 Serie Gebrauchsanweisung

make repairs before using it again.
25. Disengage the cutting means and switch off the engine:
• Before refuelling;
• Whenever you remove or reattach the grass catcher;
• Whenever you remove or reattach the side discharge chute;
• Before adjusting the cutting height, if this operation can not be perfor-
med from the driving seat.
26. When working, always keep a safe distance from the rotary cutting means,
given by the length of the handle.
27. Reduce the throttle setting before stopping the engine. Shut off the fuel sup-
ply on completing the work, following the instructions in the engine manual.
28. WARNING – If something breaks or an accident occurs whilst working, turn
off the engine immediately and move the machine away to prevent further
damage; if an accident occurs with injuries or third parties are injured, carry
out the first aid measures most suitable for the situation immediately and
contact the medical authorities for any necessary health care. Carefully
remove any debris that might cause damage or harm persons or animals
should it not be seen.
29. WARNING – The noise and vibration levels shown in these instructions are
the maximum levels for use of the machine. The use of an unbalanced cutting
means, the excessive speed of movement, or the absence of maintenance
have a significant influence on noise emissions and vibrations. Consequently,
it is necessary to take preventive steps to eliminate possible damage due to
high levels of noise and stress from vibration. Maintain the machine well,
wear ear protection devices, and take breaks while working.
D) MAINTENANCE AND STORAGE
1. WARNING! – Before cleaning or doing maintenance work, disconnect the
spark plug cable and read the relevant instructions. Wear proper clothing
and protective gloves whenever your hands are at risk.
2. WARNING! – Never use the machine with worn or damaged parts. Faulty or
worn-out parts must always be replaced and not repaired. Only use original
spare parts: The use of non-original and/or incorrectly fitted parts will jeo-
pardize the safety of the machine, may cause accidents or personal injuries
for which the Manufacturer is under no circumstance liable or responsible.
3. Any adjustments or maintenance operations not described in this manual
must be carried out by your Dealer or a specialized Service Centre with the
necessary knowledge and equipment to ensure that the work is done
correctly maintaining the machine's original safety level. Any operations
performed in unauthorized centres or by unqualified persons will totally
invalidate the Warranty and all obligations and responsibilities of the
Manufacturer.
98 99