INVENTOR AR3VI32-09WF/AR3VO32-09 Benutzerhandbuch Seite 15

Troubleshooting Troubleshooting
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
If ANY of the following conditions occurs, turn off your unit immediately! If ANY of the following conditions occurs, turn off your unit immediately!
The power cord is damaged or abnormally warm The power cord is damaged or abnormally warm
• •
You smell a burning odor You smell a burning odor
• •
The unit emits loud or abnormal sounds The unit emits loud or abnormal sounds
• •
A power fuse blows or the circuit breaker frequently trips A power fuse blows or the circuit breaker frequently trips
• •
Water or other objects fall into or out of the unit Water or other objects fall into or out of the unit
• •
DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AN AUTHORIZED SERVICE DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AN AUTHORIZED SERVICE
PROVIDER IMMEDIATELY! PROVIDER IMMEDIATELY!
Common Issues Common Issues
The following problems are not a malfunction and in most situations will not require repairs. The following problems are not a malfunction and in most situations will not require repairs.
Issue Issue
Unit does not turn Unit does not turn
on when pressing on when pressing
ON/OFF button ON/OFF button
The unit changes The unit changes
from COOL/HEAT from COOL/HEAT
mode to FAN mode to FAN
mode mode
The indoor unit The indoor unit
emits white mist emits white mist
Both the indoor Both the indoor
and outdoor units and outdoor units
emit white mist emit white mist
Page 14
Possible Causes Possible Causes
The Unit has a 3-minute protection feature that prevents the The Unit has a 3-minute protection feature that prevents the
unit from overloading. The unit cannot be restarted within unit from overloading. The unit cannot be restarted within
three minutes of being turned off. three minutes of being turned off.
The unit may change its setting to prevent frost from forming The unit may change its setting to prevent frost from forming
on the unit. Once the temperature increases, the unit will start on the unit. Once the temperature increases, the unit will start
operating in the previously selected mode again. operating in the previously selected mode again.
The set temperature has been reached, at which point the The set temperature has been reached, at which point the
unit turns off the compressor. The unit will continue operating unit turns off the compressor. The unit will continue operating
when the temperature uctuates again. when the temperature uctuates again.
In humid regions, a large temperature difference between the In humid regions, a large temperature difference between the
room's air and the conditioned air can cause white mist. room's air and the conditioned air can cause white mist.
When the unit restarts in HEAT mode after defrosting, white When the unit restarts in HEAT mode after defrosting, white
mist may be emitted due to moisture generated from the mist may be emitted due to moisture generated from the
defrosting process. defrosting process.
4 4
4
ƒPage 15
Page 14 Page 14 „