Sleep Operation - INVENTOR AR3VI32-09WF/AR3VO32-09 Benutzerhandbuch

Sleep Operation

•
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are
ready to go to sleep. When in COOL mode,
the unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
For some units, the sleep feature will stop
after 8 hours and the system will keep
running with nal situation.
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the rst two hours
Set
temperature
1hr
Heat mode( -1 C/2 F) per hour
for the rst two hours
Saving energy during sleep
For some units, the unit will turn off after
7 hours.
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the rst two hours
Set
temperature
1hr
Heat mode( -1 C/2 F) per hour
for the rst two hours
Saving energy during sleep
Keep
running
1hr
Hold the new
temperature
for 5 hours
7 hours
timer o
1hr
ƒPage 11
„