THERMEx Optica/Décor 660 Bedienungsanleitung Seite 22

Optica/Décor 660
Installation
3.1 The cooker hoods should be placed at a distance of 65-75cm from the cooking surface
for best effect. See pic1.
3.2 To install onto the wall every 100mm drill 3 holes of Ø8mm on a suitable place in line
with the hook on the hood.
3.3 Insert expended screws into the holes.
3.4 Fix the hook on the wall, put Drilling template on the hook. See pic2.
3.5 Add the soot tube to the one way valve, and put it outdoor. See pic3.
3.6 Put the two U-shaped sections on the body(see pic 3A), then put the glass in the lead
way, use four screws to fix the glass(see pic3B), Finally, drill 2 holes of Ø8mm on a
suitable place in line with the plate. Repeat 3.3(see pic4A), tighten the two screws
(see pic 4B).
Hook
Pic 2
22
Soot tube
Pic 3
U-shaped section
Pic 3A
Pic 3B
Glass
Pic 4A
Plate
Pic 4B
Pic 4