Sony ADN-8118 Bedienungsanleitung Seite 18

Displaying the Picture
18
(GB)
Each time you press the INPUT B button, the RGB, YUV or VIDEO
signal on the INPUT B connectors is selected.
The selected input is displayed on the screen.
I N P U T – A
5
Adjust the brightness of the screen with the SCREEN BRIGHT +/–
keys on the Remote Commander or the SCREEN BRIGHT +/–
buttons on the unit.
The screen becomes brighter with the + key (button), and darker with
the – key (button).
The adjustment levels are digitally displayed, with a range of MIN, 1,
2 ...... 14, MAX.
The adjusted data are automatically saved into the memory.
S C R E E N B R I G H T : 8
6
Select the wide screen mode (ADN-8118 only) and adjust the picture
size.
For details, see "Selecting the Wide Screen Mode (ADN-8118 only) and
Adjusting the Picture Size" on page 19 (GB).
7
Adjust the shift of the picture.
For details, see "Adjusting the Picture Shift" on page 21 (GB).
8
Adjust the picture quality.
For details, see "Adjusting the Picture" on page 20 (GB).
9
To turn the power off, press the STANDBY key on the Remote
Commander or the STANDBY button on the unit, then lower the
breaker on the unit.
To
turn off the on-screen display
cut off the picture
Press
the STATUS OFF key.
The menus appear even if the STATUS OFF
key is pressed.
To restore the on-screen display, press the
STATUS ON key.
the MUTING PIC key.
To restore the picture, press the MUTING
PIC key again.