MONTERING / ASSEMBLY/ ASENNUS/ MONTAGE
NOTE: We recommend being 2 people to assemble the product.
STEP 1
Slide the seat (31) onto the rail (3). Insert rear end cap (97) into the rail (3) and
secure with two bolts.
STEP 2
Secure the two stoppers (13) onto the rail (3) with two bolts (71) and washers
ø6 (79).
STEP 3
Attach the rear support (4) to the rail (3) with four bolts M8*15 (69) and washers
ø8 (78).
9