Abilica AtlanticRower NS-RE6006 Bedienungsanleitung Seite 10

STEP 4
 Attach the rail (3) to the main frame (2) with one bolt M6*15 (94) and one barrel
nut M10 (28). Lock the rail (3) in unfolded position using a fixing lever (46) and
one washer ø10 (76).
 NOTE: After tightening the fixing lever (46), the rear support of the base frame
(1) might be raised off the floor slightly. It is normal state. It will lean the floor
while in use.
STEP 5
 Insert batteries into the computer (52). Attach the computer support (6) to the
main frame (2) using one bolt M8*135 (64), one washer ø8 (78), one lock
washer ø8 (81) and acorn nut M8 (83).
STEP 6
 Clip the grommet (55) onto both sensor wires (54). Then press the grommet
(55) into the left cover (50). Connect the sensor wire (54) to the connection wire
of the computer (52). Push the excess wires back into the left cover (50).
10