Garmin GHC 10 Installation Seite 9

Advanced Operation
Understanding Programmable
Buttons
There are three programmable buttons
( ) on the GHC 10 Remote Control. You
can assign steering patterns or GPS patterns to
each button. In addition to patterns, you can assign
a direction-control toggle (forward and reverse) to
one of the programmable buttons.
Assigning Patterns or Actions to the
Programmable Buttons
Use the GHC 10 unit to assign patterns or actions
to each programmable button on the remote.
To assign a pattern or an action to a
programmable button:
1. On the GHC 10 unit, select
Remote.
2. Select the button to which you want to assign a
pattern or an action.
3. Choose a steering pattern or a GPS pattern.
OR
Direction
Choose
Instructions
Menu
Control.
Setup
> >
EN–
EN