Garmin GHC 10 Installation Seite 7

Basic Operation
Pairing the GHC 10 Remote Control
with a GHC 10 Unit
The GHC 10 Remote Control can be used with
only one GHC 10 unit. To use the remote control
with a GHC 10 unit, you must first pair it with the
GHC 10 unit.
To pair the remote control with a GHC 10
unit:
1. On the GHC 10 unit, select
Remote >
be displayed on the menu of the GHC 10 unit.
2. On the remote control, press and hold both
double arrow buttons (
"PAIRING" appears on the remote control
screen. Release the double arrow buttons on
the remote control.
3. The GHC 10 unit will display "New Wireless
Remote Found". Select
remote control with the GHC 10 unit.
Engaging and Disengaging the
GHP 10 Autopilot System With the
GHC 10 Remote Control
To engage or disengage the GHP 10 autopilot
system with the GHC 10 Remote Control, press
the StbY/eNgage (
Instructions
Search for Remote. "Enabled" will
Menu > Setup
) until the word
Connect to pair the
) button.
EN
>
EN–