Inhaltsverzeichnis - Axis Communications AXIS T92A00 Installationsanleitung

AXIS T92A00 Installation Guide
AXIS T92A00 Housing
Follow these instructions to complete the installation of AXIS T92A00 and Axis network camera:
1. "Package contents" on page 4
2. "Install the bracket" on page 5
3. "Install the camera in the housing" on page 6
4. "Connect the power cable to the camera" on page 7
5. "Route the cables to the housing" on page 8
6. "Connect the power cable to the housing 100-240V AC power cable to
AXIS T92A00" on page 9
7. "Complete the installation" on page 9
Warning!
High voltage - the electrical connection should be made by an authorized electrician.
Please observe relevant national and local regulations for the installation.
Axis Network Cameras
The following camera models are supported:
Camera Model:
• AXIS P1311
• AXIS Q1755
• AXIS 210
• AXIS 210A
• AXIS 211
• AXIS 211A
• AXIS 211M
• AXIS 211W
• AXIS 221
• AXIS 223M
Note:
Before you begin, make sure that the AXIS T92A00 package contents, power supply, and the
required cables, tools, and documentation are available. See "Package contents" on page 4.
Comment:
external antenna required, see www.axis.com
Page 3