Hot Water - Nibe Rmu S40 Installateurhandbuch

2. Press the screen with your finger.
3. Select the required offset.
Save by pressing the green button.
4.
The number of steps the value has to be changed to
achieve a degree change of the indoor temperature de-
pends on the heating unit. One step for underfloor
heating whilst radiators may require three.
Setting the temperature (with controlling room
sensor activated):
Setting range: 5 – 30 °C
The value on the display appears as a temperature in °C
if the heating system is controlled by a room sensor. To
change the room temperature, increase or reduce the
value on the display.
Browse to the function page.
1.
Press the screen with your finger.
2.
3. Select temperature:
4. Save by pressing the green button.
Caution
An increase in the room temperature can be
slowed by the thermostats for the radiators or
underfloor heating. Therefore, open the ther-
mostat valves fully, except in those rooms
where a cooler temperature is required, e.g.
bedrooms.
TIP
Wait 24 hours before making a new setting,
so that the room temperature has time to sta-
bilise.
Displaying
• current indoor temperature if the indoor sensor or
wireless sensor/thermostat is connected to the relev-
ant climate system.
• required indoor temperature
• all installed climate systems (up to 8)
• controlling wireless temperature sensors and/or ther-
mostats
• status if you are currently operating prioritised cooling.
NIBE RMU S40 | GB

HOT WATER

HOT WATER
More hot water
In the event of a temporarily increased demand for hot
water, you can choose to increase the temperature of
the hot water in this menu.
This function is activated when you press
water and switches off automatically when the temper-
ature reaches the set value.
Press Cancel to cancel the increase.
You can also select "More hot water" in the main
product's menu 2.1.
Displaying
• hot water quantity
• status for "More hot water"
• status if you are currently operating prioritised hot
water.
More hot
27