Nibe RMU S40 Installateurhandbuch Seite 20

MOUNTING
RMU S40 can be installed directly against a wall or with
the aid of the enclosed rear panel. If you use the en-
closed rear panel, you can install RMU S40 in a standard
connection box.
If you want to use the room sensor in RMU S40, the
position of the unit is important, see section
sensor.
INSTALLATION WITHOUT REAR PANEL
Install 2 screws at a distance of 32 mm. Use screws
1.
(and any plugs) suitable for the wall material.
2. Connect RMU S40 to the main product, see section
Compatible products.
Hang RMU S40 on the screws.
3.
20
INSTALLATION WITH REAR PANEL
1. Screw the rear panel onto the wall using 2 screws.
Use screws (and any plugs) suitable for the wall
material.
Room
2. Connect RMU S40 to the main product, see section
Compatible
Angle RMU S40 and secure the unit to the two
3.
clamps at the bottom of the rear panel.
Press RMU S40 firmly to the top of the rear panel.
4.
products.
NIBE RMU S40 | GB