Motorola IMPRES NNTN7063 Bedienungsanleitung Seite 17

09L67_IMPRES_MUC.book Page 15 Tuesday, December 29, 2015 11:43 AM
Charger is in Discharge/Reconditioning Mode
LED
Line 1
Line 2
Charger is Calibrating an IMPRES Battery
LED
Line 1
Line 2
LED
Line 1
Line 2
* All IMPRES batteries should be calibrated before initial use. An IMPRES
charger will automatically initiate calibration for all new batteries
Battery Capacity Data is Displayed as "%" in mAH, and Voltage
LED
Line 1
Line 2
Estimated Capacity After Charge
LED
Line 1
Line 2
Estimated Time Required to Complete Rapid Charge
in Hours, Minutes for NiCD & NiMH IMPRES Batteries Only
LED
Line 1
Line 2
Steady ORANGE
DISCHARGE
Steady ORANGE, Steady RED, & Blinking YELLOW or
GREEN
Calibrating
Battery
Steady GREEN
Battery
Calibrated
Defined by Charge State
----% RATED CAP.
----mAH --.-V
Defined by Charge State
EST CAP AFTER
CHARGE xx%
Defined by Charge State
RAPID CHG ENDS
IN xx HRS, yy MIN
15