Bluetooth Mode - MPMan SP250BT Benutzerhandbuch

* The operational range between this unit and a Bluetooth device is approximately 10 meters.
* Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of the device.
* Compatibility with all Bluetooth devices is not guaranteed.
* Any obstacle between this unit and a Bluetooth device can reduce the operational range.
* Keep this unit away from any other electronic device that may cause interference.
PAIRING YOUR BLUETOOTH DEVICE
Note: To connect your Bluetooth device your mobile, tablet or laptop to the
pair the device to the unit. The pairing operation needs only to be done once.
Press FUNCTION button to select the BLUETOOTH mode. The status indicator flashes blue to indicate an
attempt coupling is underway.
Enable the Bluetooth function of your Bluetooth audio source device to make it discoverable (see your
device's operation instructions to add or setup a Bluetooth device).
Select SP250BT on your Bluetooth device to make the pairing.
Enter default password "0000" if necessary and required by the External Bluetooth audio source.
Once your Bluetooth speaker paired with a Bluetooth device, the status indicator lights continuously in blue
and two beeps confirm that the pairing is complete.
PLAYBACK OPTIONS
1. Press PLAY/PAUSE button to play or pause playback.
2. Press [VOL-] or [VOL +] to adjust the volume level.
3. Press BACK or NEXT to select tracks.
4. Press STOP/BT knob about 2 second or press POWER knob to cut the Bluetooth connection.
PAIRING ANOTHER DEVICE
If you want to pair another device to the SP250BT, you must first disconnect the paired device:
Press and hold the STOP/BT button to disconnect your Bluetooth device already paired, then enable the
Bluetooth function of Bluetooth device you want to pair by following the coupling steps described as above.
BLUETOOTH HANDS-FREE
FUNCTION
To use your Bluetooth speaker as a speakerphone for receiving a phone call from a Bluetooth enabled phone.
 During an incoming call, press
 Press and hold
 In Bluetooth connection mode, press and hold

BLUETOOTH MODE

button to receive a call;
button to reject a call.
MPMAN
button to dial out the last dialed phone number.
19
SP250BT, you need to