Radio Operation - MPMan SP250BT Benutzerhandbuch

Press POWER button to power on the unit, the yellow status indicator will be on, then the unit
1.
will turn to radio status automatically.
 Manual Tuning: Press BACK or NEXT and then release within 1 sec.
 Auto Tuning:
(1) Press PLAY/PAUSE button about 2 seconds, the yellow indicator light will become twinkling and the
radio will start auto search channel. In general, in can be search about 10~30 channels.
(2) After the search is done, the yellow indicator light will stop twinkle and keep bright. The unit will start play
the channel that auto saved during auto search.
(3）Press BACK or NEXT to select desired channel station.
(4）Press [VOL-] or [VOL +] to adjust the volume level.
2. The radio frequency last tuned will be stored in the speaker memory.
3.Turn off the radio, press POWER button or press FUNCTION button to select another mode.
The unit is designed to play MP3 audio files contained in a USB key, if the files are not in MP3 format, the files
cannot be read correctly.
- Press the FUNCTION to select the USB mode.
- Insert one USB key; the status indicator will light on in yellow. The unit will read the USB and playback
automatically.
- Press PLAY/PAUSE button to play or pause playback;
- Press STOP button to stop playback;
- Press [VOL-] or [VOL +] to adjust the volume level.
- Press BACK or NEXT to select the previous or next tracks of the USB stick;
- Press and hold on BACK or NEXT more than 1.5 sec to fast forward or fast backward within the track;
NOTE: long press BACK button to return to the beginning of the current track.
The auxiliary input of your Bluetooth speaker allows you to connect an external source and play its content
through SP250BTspeakers.
1. Connect your external audio equipment to the AUX INPUT JACK (13)
2. Press FUNCTION to select AUX.
3. To adjust the sound level press VOLUME buttons.
Note: The unit cannot control the player.

RADIO OPERATION

USE USB
USE AUX
18