Headphone Jack; Preparation For Use - MPMan SP250BT Benutzerhandbuch

If you don't want to disturb other people during your listening, you can plug your earphones/headphone into
the PHONE jack. The audio from the speaker will be muted and you can enjoy your listening from your
earphones/headphone.
Establish a safe sound level:
Pay attention! Over time your hearing will adapt to continuous loud sounds and will give the impression that
the volume has in fact been reduced. What seems normal to you may in fact be harmful. To guard against
this before your hearing adapts, set the volume to a low level.
Slowly increase the level until you can hear comfortably and clearly and without distortion. Damage to your
hearing is accumulative and is irreversible. Any ringing or discomfort in the ears indicates that the volume is
too loud. Once you have established a comfortable listening level, do not increase the sound level.
Unpacking and set up
SP250BT
Place the unit on a flat and stable surface so that it cannot be reversed.
 Carefully remove all the components from the carton and remove all packing materials from the
components.
 Make sure nothing is accidentally discarded with the packing materials.

Save the carton and the packing materials, if possible, in the unlikely event that the unit ever needs to be
returned for service. Using the original carton and packing material is the only proper way to protect the
unit from shipping damage.
 Unwind the power adaptor and extend it to its full length.

HEADPHONE JACK

PREPARATION FOR USE

Power adaptor
15
User manual