Operations In Different Modes; Usb Operation; Audio/Usb/Fm/Bluetooth Operation - MPMan T180L BT Bedienungsanleitung

Operations in different modes

Audio operation
To connect the unit with Disc/ MP3 player/phone or other device via an audio cable.
1. Connect one end of the cable to the Mp3 player's line output/headphone and the other
end to the AUDIO IN socket on the rear panel of the unit.
2. Press the SOURCE
3. Control the playback by your Mp3 player. You can only adjust the volume of the unit.
NOTE:
When Audio in and R/L Audio in are connected to music device at the same time, the
Audio in socket is prior to play, and the R/L Audio in sockets will have no sound output.

USB operation

1. Insert the USB stick into the USB port on the rear panel of the unit.
2. Press the SOURCE
3. Once the USB stick inserted, the unit will auto detect the files and start playing.
NOTE:
1. Depending on the amount of the data and media speed, it may take longer time for the
unit to read the files stored in the USB device, this is not a malfunction.
2. For some files, even though they are of the support format (MP3), the unit can not play
because of the format compatibility.
3. The maximum size of Flash Drive that can be connected is 32GB max.
FM operation
1. Adjust the antenna direction to get the good reception.
2. Press the SOURCE
3. Briefly press the
main panel to skip to the previous or next stations.
4. Press the /
0.1MHz increments.
5. Press /SEARCH button on remote control to search stations from low to high
frequency. Press again to stop searching.
6. When listening to your favorite radio station, you can press and hold the DISPLAY/ SAVE
button to save.
Bluetooth operation
1. Turn on the Bluetooth device (e.g. phone) and stay within 10 meters of the tower.
2. Press the SOURCE
3. Enter the Bluetooth searching list, and select the found device name "T180L".
4. Select OK/YES/PAIR to connect the phone with the tower.
5. When they are paired successfully, the indicator lights solid blue.
6. For rare cases, the phone may ask you to input "0000" (four zeros) as passwords.
7. To disconnect the devices: turn off the Bluetooth function on your device and unpair with
your tower. Then follow the STEPS 2-5 to pair with a new device.
NOTE:
The unit can only connect with one device at a time and please make the pairing operation
if the device is out of 10 meters range.
to enter audio mode.
button to enter USB mode.
button to enter FM mode.
/ buttons on remote control or press and hold the
buttons on remote control to increase or decrease the frequency in
button to enter the Bluetooth mode, the indicator flashes quickly.
8
/ on the