IARP A+660 N Gebrauchs- Und Bedienungsanleitungen Seite 18

TEMPERATURE REGULATION AND CONTROL
This refrigerating appliance is equipped with an electronic control unit for the automatic maintenance
of the temperature inside the tank.
The control unit is calibrated at the factory and must not be touched by the user.
In the event that the average internal temperature is not satisfactory, you can do the following:
- Press (for 1") the key [(B)] the temperature set point value will flash.
- Press the button [ (B)] or the button [ (C)] to increase or decrease the value of the set point.
1
CONTROLS
1) Door closure system
2) Internal motorized fan microswitch
(with open door: motorized fan not connected)
3) Electronic control
A) Main Switch
B) Button to increase set point.
C) Button to decrease set point.
D) Alarm disabling key
(enabled for optional version)
OPTIONAL
To change the operating time of the open door you can do the following:
- Press (for 1") the key [(D)] the time set point value will flash.
- Press the [ (B)] key or the [ (C)] key in order to increment or decrement the temperature set point.
(the value is expressed in minutes).
3
The control unit commands are
TOUCH commands, therefore there is
no need to press.
TEMPERATURE ALARM
The electronic control unit (3) in the
event the temperature raises, will
display the alarm.
OPTIONAL
Control unit with temperature and door
open alarm buzzer.
-17-
A C
B D
2