Technical Information; General Safety Advice; Working Safely - Parkside PDS 200 A Bedienungs- Und Sicherheitshinweise

©

Technical information

Rated voltage:
Nom. power input:
No load speed:
Grinding wheel diameter:
Grinding wheel width:
Grinding wheel bore:
Circumferential speed max.: 23.2 m / s
Weight including
removable parts:
Noise data:
Refers to A-weighted sound level.
Sound pressure level:
Sound level:
Values determined in accordance with EN 61029.

General safety advice

½
CAUTION! In order to protect yourself from
the danger of electric shock, injury or fire when
using electrical power tools, please observe
the following basic safety precautions. Read all
these requirements before you use the electrical
power tool, and keep the safety advice in a
safe place.
©

Working safely

1. Keep your working area clean and
tidy.
½
A disorderly working area can lead to accidents.
2. Be aware of the effects of the envi-
ronment.
½
Do not leave electrical power tools out in the
rain.
½
Do not use electrical power tools in moist or
wet surroundings.
½
Ensure that your working area is well lit.
½
Do not use electrical power tools in
areas where there is risk of fire or
explosion.
230 V ~ 50 Hz
200 W
n 2.950 min -1
0
150 mm
20 mm
20 mm
7.5 kg
75.30 dB (A)
85.00 dB (A)
Introduction / General safety advice
3.
Protect yourself from electric
shock.
½
Avoid touching earthed objects such as pipes,
heating radiators, ovens or refrigerators with
parts of your body.
4. Keep other people at a safe distance.
½
Do not allow other people, in partic-
ular children, to touch the electrical
power tool or the mains lead.
Keep them away from your working area.
5. Store currently unused electrical
power tools in a safe place.
½
When not being used electrical power tools
should be stored in dry conditions in a high or
enclosed place, out of reach of children.
6. Do not overload your electrical pow-
er tool.
½
By keeping within the specified working range
of the tool you will work more safely and
achieve a better result.
7. Use the right electrical power tool for
the task.
½
Do not use low-output devices for heavy tasks.
½
Do not use an electrical power tool for purposes
for which it was not intended. For example, do
not use a hand operated circular saw for trim-
ming tree branches or cutting logs.
8. Wear suitable clothing.
½
Do not wear loose-fitting clothing or jewellery.
They could become caught on moving parts.
½
We recommend that you wear anti-slip foot-
wear when working outdoors.
½
If you have long hair, wear a hair net.
9.
Use personal protective
equipment.
½
Wear protective glasses.
½
Wear a dust mask if your work generates
dust.
10. Attaching the vacuum dust extraction
device.
½
Where there are connection points provided
for vacuum dust extraction please ensure that
the connections are made and used properly.
11.
Do not use the mains lead for
purposes for which it was
not intended.
GB 7