Wiseup WIFI02 Benutzerhandbuch Seite 6

Check if the WAN mode or remote view setup works!
1. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your
phone or mobile device from the current WIFI network, enroll your phone or mobile device
in another WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your
mobile network data instead.
2. Make sure your smartphone or tablet PC has Internet access and launch the
"Plug&Play" or "P2PCamViewer" APP again.
3. Tap "WAN" or "My Cameras" at the bottom of the screen. Tap the code icon to scan the
QR code at the back of the camera directly. For Android devices, the camera will pop up
in a few seconds. For IOS devices, the camera UID and password will fill in the blanks
and then you need to tap "Login" to log in the camera. If the camera shows "Online" and
the red indicator light remains solid, it means the remote view setup is complete and the
camera has entered into WAN mode. You can go ahead to view live or recorded video
remotely.