Wiseup WIFI02 Benutzerhandbuch Seite 5

hotspot to enroll the camera in.
Step 4: Tap "OK" to complete the remote view setup and the camera will reboot automatically.
Step 5: Exit the "Plug&Play" APP.
For IOS:
Step 1: Launch the "P2PCamViewer" APP. Tap the gear icon on the "Local cameras"
page and then go to "Wireless settings" page.
Step 2: Turn on "WiFi" function. Tap the exclamation mark to search for available
networks in the area then select your desired WIFI hotspot to enroll the camera in.
Step 3: Tap "Done" to complete the remote view setup and the camera will reboot automatically.
Step 4: Exit the "P2PCamViewer" APP.