Frequently Asked Questions - Wiseup WIFI02 Benutzerhandbuch

settings in 5 seconds.
IX. Charging
9.1. Connect the camera to an outlet AC power supply using the power adapter and USB
cable included.
9.2. It will take 1 hour to obtain a full charge.
9.3. The camera can record video up to 1 hour on a single charge.

Frequently Asked Questions

Q1: Why doesn't Camera WIFI signal appear on my WIFI page?
A1: There are 4 solutions to this question:
1. Reset the camera (See VIII).
2. Keep your phone or mobile device within the camera's WIFI hotspot range, refreshing
the WIFI signal page. It may take up to 2 minutes for the hotspot to become recognizable
on your phone or mobile device's WIFI setting page.
3. Shut off your phone or mobile device's WIFI function for a while, then turn it on to
search again.
4. The camera is in low battery, connect it to an outlet AC power supply using the USB
cable and power adapter included.
Q2: Why does the camera show offline right after I login it on the "WAN" or "My
cameras" page?
A2: The remote view setup or WAN mode takes 1-3 minutes to complete. Be patient. If
the camera still shows offline, check if the camera has been enrolled in a good WIFI
network successfully. If not, you need to reset the camera (See VIII) and set up all over
again.
Q3: How do I share my camera with family members?
A3: First, make sure your camera is in WAN mode already and your family members
install the "Plug&Play" or "P2PCamViewer" on their phone or mobile devices. Second,
use your family members' phone or mobile devices to scan the QR code for Cam ID, user
name and password. Then they can log in the camera.