RIKA Look RLU Montageanleitung Seite 35

3. STEEL AND CAST CASE LEGS
Delivered Parts E15668 Steel case leg
4x B17637 Steel case leg
4x L02763 Insert plate
4x N111843 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
Delivered Parts E 15669 Cast case leg
4x Z36216 Cast iron foot
4x L02763 Insert plate
4x N105049 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
Mounting
(exemplified with steel casse leg)
Attach the steel case leg and the insert plate with the nut and washer.
Tighten the nut firmly. Attach all 4 legs in this way with the insert plates (positions
as shown below), washers and nuts.
Loosen the screws which are holding the transport frame to the pallet.
Note
Warning, the stove is no longer secured against tipping!
Tilt the stove, for example with a transport trolley. Now unscrew one side of the
transport frame.
Now tilt the stove on the free-standing feet and unscrew the second part of
transportation frame.
Set the stove carefully on all 4 feet.
#13
#8
#10
#8
|19
18