Controls And Displays; Power Unit; Main Unit; Input Selector - TAD -C600 Bedienungsanleitung

Controls and displays

Power unit

1
1 Power indicator
Indicates Power status.
Lighted orange: ON (unit can be operated).
Lighted red: Standby mode
2

INPUT SELECTOR

Rotate to change the input device.
3 Remote control unit signal receiver
For details, see page 11 "Using the remote control".
4 VOLUME dial
Adjusts the sound volume.
Rotate clockwise to raise the volume; rotate counterclockwise
to lower the volume.
5 Operating keys
Use to operate the unit.
MENU button
Use to select the setting menu. When the button is pressed,
the setting mode changes.
EXIT button
Press to confirm selected settings.

Main unit

2
INPUT SELECTOR
MENU EXIT
 DISP
 Power switch
Use to switch between ON and Standby modes.
Lighted orange: ON (unit can be operated).
Lighted red: Standby mode
DISP button
When pressed, the display status alternates between Lighted
(normal status)  Not lighted (off)  Lighted (normal status).
Whenever power is switched ON, the display appears with the
status last selected before the power was turned off.
+/− buttons
Press to select setting values.
FINE button
Use to change the sound volume adjustment in increments of
1 or 0.5 step.
MUTE button
Press to temporarily mute the audio playback.
3 4
VOLUME
– +
FINE MUTE
5
TAD-C600
9