Installation And Connections; Installation - TAD -C600 Bedienungsanleitung

INSTALLATION AND CONNECTIONS

Installation

WARNING
' When installing, choose a level and flat surface that can sufficiently withstand the weight of this unit. Failure to do so
could cause the unit to fall, resulting in an accident. If installed on a shelf, the user is responsible for confirming that the
location is fully able to support the heavy weight of the amplifier.
' To promote heat-emission, do not put objects on top of this unit or cover with a sheet (such as cloth or curtains) while
operating. Failure to do so could cause the unit to malfunction through abnormal heating.
' The power unit and main unit each rests on three large main legs and two smaller auxiliary legs. The two auxiliary legs are
provided to prevent the unit from suddenly striking the floor in the event that sudden weight is placed on the unit, but they
do not contact the floor under normal conditions.
CAUTION
' To prevent interruption of cooling air flow to the unit, do not install it on carpets, rugs, or other soft materials, or in narrow
locations without sufficient surrounding clearance.
' The legs on both the power unit and main unit of the TAD-C600 are three-point spikes and may scratch or scar the surface
on which the units are placed. In order to avoid such damage, it is recommended that the accessory felt pads be placed
under the feet. Care should always be used when moving the units, however, since even when the felt pads are used,
scarring may result if the units are dragged across the mounting surface.
12