To Begin Playback; Before Turning On The Power; Operation - TAD -C600 Bedienungsanleitung

TO BEGIN PLAYBACK

Before turning on the power

Make sure that the input terminals and output terminals are securely connected.

Operation

1. Confirm that the power unit's main power switch is in the ON position, then press the main unit's front panel  power
switch (or the remote control unit's AMP  button) to turn on power to the unit.
Confirm that the power unit's front panel power indicator is lighted orange.
2. Set the unit's VOLUME dial to its minimum setting.
3. Set the power amplifier's power switch to ON.
Adjust the unit's VOLUME dial to produce the desired level of sound.
4. When finished playing, set the unit's VOLUME dial to its minimum setting and turn OFF (Standby) the power switches to
the power amplifier and this unit.
16