Installation Des Filters - CombiSteel VDB-80S Gebrauchsanweisung

The operation is opposite with the arrowhead direction in the above.
1. Set the washer into the groove of uppper filter hull.
2. Put the filter core into the filter hull, then cover by the cover of filter hull.
3. Fix the fixed board of filter hull on the filter cover by screws.
4. Connect the filter hull connector with the water inlet tube of the filter hull, install the washer, then connect
it with the end of the filter cover, which has "in" word on it.
5. Connect the filter hull connector with the water inlet tube of the filter hull, install the washer, then connect
it with the end of the filter cover, which has "out" word on it.
6. After completing the installation, fix the filter to back of the ice maker by screws.
7. Connect the water inlet tube of filter hull to water supply.
8. Connect the water outlet tube of filter hull to the water inlet valve of ice maker.

INSTALLATION DES FILTERS

7