Palazzetti ECOMONOBLOCCO WT F Serie Einbauhandbuch Seite 29

5 Installation
5.1 General considerations
In the following paragraphs there are some guidelines
to follow in order to obtain the maximum performance of
the product purchased.
The following instructions are nevertheless subject to
compliance with any laws and national, regional and
municipal regulations in force in the country where the
product is installed.
5.2 Dry positioning
It is recommended to dry pre-install the appliance in order
to verify the dimensions of the various components and
air intakes.
It is necessary to align the front part of the appliance with
the internal edge of the marble top, leaving a gap of 10
mm to allow free expansion of the appliance (Fig. 5.2).
5.3 Levelling of the appliance
To adjust the final height of the fireplace (height of the fire
floor of the covering) simply adjust the adjustment screws
on the legs. Adjust the four feet to bring the appliance
to a distance in height from the marble cover profile of 5
mm and a safety distance in depth from the marble top
of 10 mm (Fig. 5.2) ensuring that the base of the fire box
is level (AB) (Fig. 5.3).
Fig. 5.3
cod. 004777520 - 21/03/2019 - Palazzetti - PN - Italy
-
+
Fig. 5.2
min. 5 mm
min. 10 mm
Product images are purely indicative
29