Troubleshooting - SOLAC espression CA 4805 Gebrauchsanleitung

19 TROUBLESHOOTING

PROBLEM
The coffee-maker does not come on.
The first coffee is of poor quality
When I turn the machine on, a little dirty
water comes out.
When I turn the machine off, a little dirty
water comes out.
The coffee is not hot enough.
When coffee made with ground coffee,
the coffee-maker pours out only water.
Ground coffee has been used and no cof-
fee is obtained:
CAUSE
The coffee-maker is not connected to
the mains.
The first time the grinder is started, it does
not pour sufficient quantity into the
brewing unit.
The coffee-maker automatically cleans
the pipes to make sure of coffee-maker
has performed the optimum quality, free
from the remains of previous coffees.
Before turning off and to prevent the cof-
fee outlet from being blocked with coffee
remains, the coffee-maker expels a little
water and cleans the coffee outlet.
The cups are cold.
You have not put the ground coffee in the
coffee dispenser.
Too much coffee has been placed in the
dispenser.
27
SOLUTION
Press the switch, position 'I' (on).Check
the cable and the plug.
If it still does not come on, take the
coffeemaker to an authorised techni-
cal service centre.
Throw the coffee away. The other coffees
will always be of good quality
Do not put the cup in position until the
auto cleaning process finishes.
No solution is required; this function has
been designed to prevent you from hav-
ing to clean it manually
Preheat the cups
Add ground coffee using the dispensing
spoon (maximum one flat spoon. ful) and
select the coffee again
Clean the ground coffee dispenser. Re-
peat the operation using the dosage
spoon and pour in a maximum of one tea
spoon.