SOLAC espression CA 4805 Gebrauchsanleitung Seite 37

When placing the tank back in position, make sure it fits
into the flap on the body, so that it is perfectly in place.
3. Connect the power cable.
4. Turn on the on/off switch at the rear of the coffee-maker.
Turn it to the "I" position to switch the coffee-maker on.
5. The standby button will come on (blue).
6. The internal circuits must be filled with water before
using the coffee machine for the first time. The steam
and hot water icons will be lit.
7. Place the container (glass or jug) under the coffee outlet.
Push both buttons at the same time to fill the system.
IMPORTANT: This operation must be carried out BEFORE
carrying out any other operation.
IMPORTANT: The circuit must be filled when the steam
and hot water icons are lit at the same time. This will hap-
pen when the machine is connected to the main switch.
8. After pressing both buttons, they will start to flash and the
circuits will be filled. This operation will be completed af-
ter the water is driven through the coffee outlet.
9. This process will stop automatically when both buttons
are pressed at the same time.
10. Remove the compartment with the water.
11. The coffee -maker will turn off and is ready for use.
Press the standby button.
12. All lights will be lit during one second and the selectors
for 1 and 2 coffee cups will start to flash. When the lights
stop flashing, the coffee machine is ready for use.
13. The coffee -maker auto - cleans the pipes to remove
possible remains of coffee or water. During this proc-
ess, water comes out of the coffee outlet. This enables
you enjoy a coffee made with clean, fresh water.
9 SUGAR CUBE COMPARTMENT
10 ADJUSTMENTS
A) Adjusting the grinding level.
You can regulate the size of the ground coffee.
This size has a direct effect on the coffee made
by the coffee-maker and it is advisable to test
the grinding level until you obtain the type of
grind you prefer. To adjust the grinding level,
use the regulator inside the coffee bean tank.
7
If you normally use sugar cubes, you
can store them in the coffee-maker.
Lift the sugar cube compartment
cover and place the cubes inside.
This compartment can be removed
for cleaning and to make the filling
process easier.
IMPORTANT! Take care not to
place the sugar cubes in the ground
coffee dispenser by mistake.